Blog

Latest News

 

Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.

B&K Rotary Punching Machines

B&K Rotary Punching Machines

The B&K Rotary Punch can be retro-fitted to your existing roll forming line or integrated with the high speed, auto adjusting revolutionary B&K Supermill System by The Formtek Group for the metal building industry.

B&K Rotary Shearing Machines

B&K Rotary Shearing Machines

The B&K Rotary Shear can be retro-fitted to your existing roll forming line or integrated with the high speed, auto adjusting revolutionary B&K Supermill System by The Formtek Group for the metal building industry.

Dahlstrom Cut-Off Presses

Dahlstrom Cut-Off Presses

Dahlstrom Cut-Off Presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops. This compact underslung design delivers the tonnage needed with the benefit of a small foot print.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Four-Post Mechanical Presses

Dahlstrom Four-Post Mechanical Presses

Dahlstrom mechanical presses are a versatile, robust option for roll forming and flexible fabrication applications. Notch presses can pierce, notch, emboss or add other engineered features to the product, either before (pre-notch) or after (post-notch) the roll former, however the application may require. Cutoff presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Hydraulic Notcher

Dahlstrom Hydraulic Notcher

  • Custom “C” Frame Presses offered in a variety of sizes and tonnage.
  • Presses adjusted manually or motorized with digital readout. (Servo Positioning also available)
  • Offered as stand-alone units or can be integrated into automatic fabricating systems.
Dahlstrom Hydraulic Presses

Dahlstrom Hydraulic Presses

Dahlstrom Hydraulic Presses offer the flexibility of standard 4-post configuration or custom designs: flying press frames for special notching applications or self­-contained with a cutoff die, depending on what the application requires.

FEATURES

  • Welded Steel Construction
  • Crankshaft, Pull rods, Wrist pins made from High Strength Alloy Steel
  • Air Friction Clutch and Spring set Brake
  • High Speed Flywheel minimizes die travel and increases production
  • Vertical and Horizontal Adjustment
Dahlstrom Pneumatic Presses

Dahlstrom Pneumatic Presses

Dahlstrom Pneumatic Presses are economical, compact, available from 5 tons to 60 tons for a piston or bladder style stroke mechanism and include the following features.

  • Welded Steel Construction
  • Crankshaft, Pull rods, Wrist pins made from High Strength Alloy Steel
  • Air Friction Clutch and Spring set Brake
  • High Speed Flywheel minimizes die travel and increases production
  • Vertical and Horizontal Adjustment
Dahlstrom Series “00” Roll Forming System

Dahlstrom Series “00” Roll Forming System

Toggle Style Roll Forming Machine featuring:

  • Welded Steel Construction
  • Timken Roller Bearings
  • Roll Shafts and Gears made from High Strength Alloy Steel, Heat Treated and Precision Ground
  • Oil Bath Lubrication
  • Base designed for Coolant Trough and tank
Dahlstrom Series “50” Roll Forming System

Dahlstrom Series “50” Roll Forming System

The Dahlstrom Series “50” Roll Forming System includes a gear-style roll forming machine featuring:

  • Welded Steel Construction
  • Timken Roller Bearings
  • Roll Shafts and Gears made from High Strength Alloy Steel, Heat Treated and Precision Ground
  • Top and bottom roll shafts driven through square gearing
  • Micrometer type screw adjustment
Dahlstrom Sheet Lifter

Dahlstrom Sheet Lifter

  • Handwheel plus Chainwheel action
  • 5:1 Safety factor
  • Adjustable Drag Brake
  • All moving parts on vertical legs provided with Torrington thrust washers and grease fittings
  • All welded construction
  • Patented Tongrip feature
  • 5 and 10 ton sizes available