Automotive Flying Saw from Hill Engineering is ideal for automotive window molding / co-extrusions, extrusions and rubber products.
Blog
Latest News
Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.
Hill Engineering In-line Flying Dimple-Free Tube Cutoff
The Hill Engineering In-line Flying Dimple-Free Tube Cutoff is an affordable “duo-cut” cutoff with “closed loop” electronic measuring/accelerator with Line speeds up to 250 F.P.M. and is available in the following configurations in addition to our stationary (recut) “duo-cut” with programmable feeder:
- Model I: .188 – .75 Diameter
- Model II: .375 – 1.50 Diameter
- Model III: .750 – 3.00 Diameter
Hill Engineering In-Line Heavy-Duty Flying Saws
Heavy Duty Flying Saws are ideal for cutting-to-length steel welded closed shapes and tubing in-line. Also perfect for office partitions, welded roll formed shape and tubes where quality of cut is more important than overall speeds of cut.
Hill Engineering In-Line Standard Window Fenestration Saws
The Standard Window Fenestration Saw from Hill Engineering uses “Closed Loop” technology which brings a new dimension to high speed in-line sawing of roll formed aluminum screen frames, window spacers, closed shapes and tubing cut directly off the roll former to “Assembly” tolerances up to 140 FPM holding ± .020” to .030” on 24” min. lengths. These units can also run up to 300 F.P.M. holding ±.040″. For Screen Frame and Muntin.
Hill Engineering Mechanical Presses
Hill Engineering can utilize various Mechanical Press types within the Formtek family of brands for pre-notch/pre-punch/pre-cut/embossing applications, as well as product cut-off applications. Four-post, two-post, open-throat, tilt type, or commercial presses from various manufacturers can be reviewed to solve our customer’s application.
Hill Engineering Roof and Floor Cropoff Dies
Roof panel & floor decking flying cutoff dies since the 1950’s. Standard designs or custom engineered for special shapes. Best valves in the industry – quality of cut, long runs, reasonable prices.
Hill Engineering Tube Cutoff Hydraulic Die/Press System
The Hill Engineering Tube Cutoff Hydraulic Die/Press System is an “in-line” system which features a blade that cuts through a pre-notched opening. Photocell drops mechanical pickup into correct opening to relate pre-notch pattern to cutoff ends.
Tishken Edge Conditioning Systems
Tishken Edge Conditioning Systems are a service center’s most valued machine. The system economically produces edge conditioned, straightened, and cut-to-length or recoiled product. Whether it is narrow mults, drops, or secondary material, the Tishken Edge Conditioning system can help you produce saleable products which are more valuable to your customers.
Tishken Four-Post Mechanical Presses
Tishken Mechanical Presses are a versatile, robust option for roll forming and tube mill systems. Notch presses can pierce, notch, emboss or add other engineered features to the product, either before (pre-notch) or after (post-notch) the roll former, however the application may require. Cutoff presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops.
Tishken Specialty Slitting Systems
Tishken Specialty Slitting Systems are a purpose designed and built solution for OEMs and service centers to produce narrow mults, specialty coil to coil product. These systems were designed for service critical applications including ferrous and non-ferrous materials with the following dimensions: incoming coils up 10” to 24″ wide, thicknesses ranging from 0.015” to 0.135,” and with coil weights up to 20,000 lbs. Additional features that may be offered include the option of quick change slitter heads and single or multiple recoilers with oscillate winding.