The 2DWR Supermill runs both drywall stud and track products from 1-5/8″ through 8″ web widths and continuous material thickness adjustment from 25 gauge drywall up to 18 gauge light structural products. The flange height for studs is set as a standard of 1-1/4″. It can also include optional hemming fixture for light gauge track products. And the 2DWR Supermill system has the smallest foot print of any high production stud and track roll forming system available today.
Dahlstrom Cut-Off Presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops. This compact underslung design delivers the tonnage needed with the benefit of a small foot print.
Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.