The 2DWR Supermill runs both drywall stud and track products from 1-5/8″ through 8″ web widths and continuous material thickness adjustment from 25 gauge drywall up to 18 gauge light structural products. The flange height for studs is set as a standard of 1-1/4″. It can also include optional hemming fixture for light gauge track products. And the 2DWR Supermill system has the smallest foot print of any high production stud and track roll forming system available today.
Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.
Adjustment from 25 gauge drywall up to 18 gauge light structural products with variable leg lengths up to 2″. The Supermill outperforms the competition by successfully producing drywall and light structural stud and track, in a precut method, thanks to the precision build quality of B&K’s high technology equipment and the short horizontal center distance of the roll former, insuring consistent product dimensions across the range of profile sizes and gauges, where the competition fails.
Adjustment from 25 gauge drywall up to 16 gauge light structural products with variable leg lengths up to 2″. The Supermill outperforms the competition by successfully producing drywall and light structural stud and track, in a precut method, thanks to the precision build quality of B&K’s high technology equipment and the short horizontal center distance of the roll former, insuring consistent product dimensions across the range of profile sizes and gauges, where the competition fails.
B&K 3TSR Supermill’s Automatic Servo Adjustment from 25 gauge drywall up to 12 gauge structural products. And changing from one hole shape to another involves a simple change out of the die and punch inserts. The amazing B&K rotary shear cuts the coil right after punching, when the blank has already started into the roll former.
The B&K Versamill system is an economical solution for production of drywall stud, track and furring channel and other common non-perforated drywall accessories. The B&K Versamill System provides the capacity to produce 20 to 25 gauge stud and track – as well as various drywall Accessory components. And, all of the parts can be produced at speeds up to 150 feet per minute.
The Yoder “Hot Sizer” Hot Sizing Mill System consists of multiple stands to reduce and re-round API pipe which has been immediately heat treated. The Hot Sizer is customized based on the amount of work required from the Customer’s specifications. The Yoder Hot Sizer is accustomed to experiencing pipe temperatures as high as 1100˚ F and can handle speeds up to 200 FPM. Quick-change as well as special drive arrangement options are available to help our Customer’s experience high throughput on their heat treating finishing floors.
In response to the increasing world wide demand for small diameter (i.e., 0.188″ to 0.375″ OD) steel tube for both refrigeration and automotive purposes, Yoder can provide equipment for production of these tubes. Since 1992, complete Yoder Cold-Stretch Reduction Small Diameter W-10 / W-15 Tube Mill Systems have been supplied to Turkey, China (2 lines), South Africa, and the United States. This U.S. line may be the first new mill of its type installed domestically in the last fifteen years.
Yoder has been involved with the pipe producing market for many years. Cutoffs have evolved from rotary disc or tool machines to friction saws to the latest saw technologies. Milling saws provide a fantastic edge finish with minimum burr but tend to have longer cycle times. Formtek works with its licensee Milltech to provide the pipe mill markets the highest quality with the greatest performance. Milltech has developed mill cutoff systems utilizing 2-heads or 4-heads (depending on pipe size) to provide the best combination of end finish and cycle time performance. These machines are designed to handle the heavy strains put on them by the demanding cycles required by our customers.
Yoder has been in the pipe industries for over sixty years. Pipe is often threaded for a particular application and Milltech has developed two pipe threading systems to handle sizes up to 13-3/8” OD and 20” OD. These machines perform extremely fast cycle rates and when you put them into your threading system – your thread processing costs will certainly decrease!
Milltech and Formtek can now offer you either stand alone machines or complete threading systems, depending on what best fits your budget.
The MTL-340 series will produce 4-1/2” to 13-3/8” (114.3 to 339.7 mm) OD while the MTL-508 series will 10-3/4” to 20” (273.1 to 508.0 mm) OD. The MTL-340 has average cycle rates of 44 pcs/hr while the MTL-508 has average cycle rates of 37 pcs/hr. Different thread types can be produced, please inquire.
Strut framing channels are used in construction for installation of electrical and mechanical supports as well as utilities and air handling duct to name a few. They are used as a common solution for general industrial framing needs. Due to the versatility of applications and uses, there is a range of strut sizes, material thickness, hole patterns and profile features that may be required. Over the years, Yoder has developed robust Strut Cable Tray Roll Forming Systems for producing strut framing channels that support regional manufacturers as well as the high production OEM producers. The combination strut tooling design that Yoder has perfected enables customers to have a single installation that covers the entire product range with only partial tooling set changeover when switching products. This tooling design helps customers to produce channels in smaller production quantities with faster changeover and less setup scrap so they do not need to maintain large inventories of odd strut sizes in case of an order.