Blog

Latest News

 

Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.

B&K Rotary Punching Machines

B&K Rotary Punching Machines

The B&K Rotary Punch can be retro-fitted to your existing roll forming line or integrated with the high speed, auto adjusting revolutionary B&K Supermill System by The Formtek Group for the metal building industry.

B&K Rotary Shearing Machines

B&K Rotary Shearing Machines

The B&K Rotary Shear can be retro-fitted to your existing roll forming line or integrated with the high speed, auto adjusting revolutionary B&K Supermill System by The Formtek Group for the metal building industry.

Dahlstrom Cut-Off Presses

Dahlstrom Cut-Off Presses

Dahlstrom Cut-Off Presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops. This compact underslung design delivers the tonnage needed with the benefit of a small foot print.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Four-Post Mechanical Presses

Dahlstrom Four-Post Mechanical Presses

Dahlstrom mechanical presses are a versatile, robust option for roll forming and flexible fabrication applications. Notch presses can pierce, notch, emboss or add other engineered features to the product, either before (pre-notch) or after (post-notch) the roll former, however the application may require. Cutoff presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Hydraulic Notcher

Dahlstrom Hydraulic Notcher

  • Custom “C” Frame Presses offered in a variety of sizes and tonnage.
  • Presses adjusted manually or motorized with digital readout. (Servo Positioning also available)
  • Offered as stand-alone units or can be integrated into automatic fabricating systems.
Dahlstrom Hydraulic Presses

Dahlstrom Hydraulic Presses

Dahlstrom Hydraulic Presses offer the flexibility of standard 4-post configuration or custom designs: flying press frames for special notching applications or self­-contained with a cutoff die, depending on what the application requires.

FEATURES

  • Welded Steel Construction
  • Crankshaft, Pull rods, Wrist pins made from High Strength Alloy Steel
  • Air Friction Clutch and Spring set Brake
  • High Speed Flywheel minimizes die travel and increases production
  • Vertical and Horizontal Adjustment
Dahlstrom Special Presses

Dahlstrom Special Presses

Dahlstrom Special Presses offer the flexibility of standard 4-post configuration or custom designs —  flying press frames for special notching applications or self­-contained with a cutoff die — to meet the requirements of the application.

Hill Engineering Automated Tube Piercing Machinery

Hill Engineering Automated Tube Piercing Machinery

Hill Engineering Automated Tube Piercing Machinery includes the following features:

  • Produces spacer tubes for fuel cells
  • .304″ th. Stainless, .515″ od X .011″ wall
  • Four rectangular slots pierced in each tube
  • Every tube is burr free, clean and non-distorted
  • Air driven cam-pierce design piercing two slots per stroke
  • Special tooling was designed to accept a family of different size parts
  • System produces 400 finished pieces per hour
Hill Engineering Driven Rotary Punch System

Hill Engineering Driven Rotary Punch System

Driven Rotary Punch Systems from Hill Engineering suit a range of continuous pattern and high­-speed applications such as building products, metal construction and filter media, among others. Hill Engineering has increased the capabilities of the rotary punching technology with the high-speed design featuring:

  • Up to 700 FPM
  • 0.108″ Steel Maximum Thickness
  • Stand-Alone or In-Line Configurations
  • High-Speed Shear for Precut Roll Forming

Like any Hill Engineering equipment and tooling solution, Pull-Through Rotary Punch Systems are available as stand-alone machinery or integrated with your existing line, used machine, or as part of a turn-key Formtek system.