Get a Quote

Contact Us

Blog

Latest News

 

Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.

Tishken Specialty Slitting Systems

Tishken Specialty Slitting Systems

Jul 6, 2020 | , ,

Tishken Specialty Slitting Systems are a purpose designed and built solution for OEMs and service centers to produce narrow mults, specialty coil to coil product. These systems were designed for service critical applications including ferrous and non-ferrous materials with the following dimensions: incoming coils up 10” to 24″ wide, thicknesses ranging from 0.015” to 0.135,” and with coil weights up to 20,000 lbs. Additional features that may be offered include the option of quick change slitter heads and single or multiple recoilers with oscillate winding.

Yoder Cold-Stretch Reduction Small Diameter W-10 / W-15 Tube Mill

Yoder Cold-Stretch Reduction Small Diameter W-10 / W-15 Tube Mill

Jul 7, 2020 | , ,

In response to the increasing world wide demand for small diameter (i.e., 0.188″ to 0.375″ OD) steel tube for both refrigeration and automotive purposes, Yoder can provide equipment for production of these tubes. Since 1992, complete Yoder Cold-Stretch Reduction Small Diameter W-10 / W-15 Tube Mill Systems have been supplied to Turkey, China (2 lines), South Africa, and the United States. This U.S. line may be the first new mill of its type installed domestically in the last fifteen years.

Yoder Four-Post Cut-Off Mechanical Presses

Yoder Four-Post Cut-Off Mechanical Presses

Jul 6, 2020 | , , , ,

Yoder Four-Post Cut-Off Mechanical Presses employ a fabricated steel sub-base, with screw-type lateral and vertical adjustment for machine alignment. The heavy, cast semi-steel frame is stress relieved and accurately machined to insure correct and permanent alignment of moving parts. The heavy duty, machined upper crosshead insures accurate alignment of the die rails, which are hardened and ground, and mounted in pilot grooves.

The crankshaft — a heat treated and machined alloy steel forging — and the flywheel are mounted in grease-lubricated, anti-friction roller bearings with dust seals. The air-operated, multiple-disc clutch and spring set brake are electrically controlled. Provision is made on the P-42 and P-52 presses for non-repeat, single stroke operation, manual cutting, and jogging.

These machines are furnished with a solid-type head, adjustable with spacers or, as an optional feature, can be equipped for setting of shut height with a single screw.

Yoder Open Throat Cut-Off Mechanical Presses

Yoder Open Throat Cut-Off Mechanical Presses

Jul 6, 2020 | , , , ,

The open throat design of Yoder Open Throat Cut-Off Mechanical Presses provides maximum accessibility for die adjustment and service. It also makes for easier removal of finished lengths of stock. These press type cutoffs have fabricated steel sub-bases, with adjusting screws for lateral and vertical alignment. Semi-steel, cast frames are accurately machined to insure permanent alignment of moving parts. Heads are semi-steel castings, deeply ribbed. Long bearing surfaces are accurately fitted to machined ways in the press frame. Long steel gibs hold the head in the ways, insuring proper alignment. Hardened and ground steel die slides support the die shoe and punch holder of the P-25 press. Hardened and ground die rails, mounted in pilot grooves in the press frame of the P-55 and P-75 units, insure alignment of the sliding cutoff die.

Yoder Pneumatic Presses

Yoder Pneumatic Presses

Jul 6, 2020 | , , , ,

Yoder Pneumatic Presses are economical and compact, are available from 5 tons to 30 tons for a piston style stroke, and feature the following key advantages:

  • Pneumatic piston is mounted in sound-limiting base assembly
  • Modular piston/ram design for ease of service
  • Low center of gravity allows for broad range of applications
  • Simplified operator controls with safety features
  • Easy ram height and stroke adjustments